Видео

The weed eater and edger is such a great combo to have. Theyll do your whole regular block of land on one 6amp battery. The clip on hanging hook is very handy for the one your not using.

How thick are the boards?

What color is your wall ?

These are face grain cutting boards not edge grain I believe. Nice video.

Nice video, but I have read and seen when gluing the table top, the clamps are supposed to alternate between over and under the wood parts. Also, I have read and seen that when arranging the table top, to make sure that the grains alternate between them, because it would avoid swelling of the wood. (Not sure if done that wa or not in your video). But for clarity, I am not a wood worker. I am just interested in the craft.

Try the backpack blower. That is sweet!

Cool cats and kittens…free Joe Exotic!!!! 😂

100 dollars now

Is that mount storm?? You’re from Sonoma county?

I am late to the party but this is one of the most satisfying videos I've watched in a while. I love ALL the design and patterns. Do you remember the widths of each strip? I loved the walnut-maple pattern with a strip of cherry in the middle. Well done

Often, when trimming hedges, if I hit a limb which is about the size of my little finger, it would jam my trimmer. I would wait a few minutes and it would work again. This last time, it won’t restart. It only clicks. Very disappointing as I loved the convenience and it worked good, when it worked.

Thanks for the info! ....I'm gonna run out and get me a new flannel like yours. I believe it will make me look smarter!

What were the sizes for the cube spacers

I no longer use glue to attach cleats. Seems I frequently put them in the wrong place vertically and then can’t move them. You may want to relocate the tool holder in the future and want to move it up or down in relationship to the wall cleat.

Nice work! Im going to tackle this on my new home. Wouldn't it be easier to prime the walls and MDF before beginning and then touch up the primer where needed prior to paint?

So he stops the video, because he’s embarrassed that he can’t figure out how to put it together? What a useful video, leave out the part everyone can use! Stop wasting everyone’s time! Stop making videos!

This should be called Star Wars music + a timelaps of me installing the wall. Not helpful.

I came for the build and stayed for the music. Thanks a lot, superb video

Flooring $150 Glue $3400

Thanks for posting! Can you tell me if the variable speed really changes the motor rpm (or if it is just pressure adjustment)? I need an adjustable metering pump. Thanks again!

I am considering this machine and I want to mount it (without the stand) under my workbench on a slide out. Can you give me the measurements (exact footprint width, height, and depth).

Thanks for your simple explanation

I really enjoyed thus video, I like the simple lines. I picked up several helpful comments you made. Regarding the close up of you using the random orbital sander, it wasn't helpful and in fact the magnified close up movement was dizzying.

Thank you very much for this outstanding informative video………….Helps a beginner 100%

Title says “edge grain”, they aren’t edge grain, they are long grain.

I’m surprised it’s not breathless

Excellent Video, and nice looking finished product. Question, the main 'maple' strips are 'Edge' grain, whereas the walnut thin strips are 'Face' grain, correct?

The whole reason I watched this video was to learn how to determine the angles to cut…. So massive fail on that front.

I recently used starbond to fill knot holes on an outdoor cedar farm table. In my experience when using cedar you don’t want to over fill the holes with glue. The knots are so hard compared to the wood that it created humps when I tried to sand the knots flush.

“Cool cats and kittens”. I wonder how many people know who said that?

What size did you go in your mdf I think you said and it turn out beautiful

Mine quit working but it was a slow death. Sometimes I'd go to the shop and it would be running all by itself. I contacted wen and they told me that signals in the neighborhood are allowed to intwrfere with the remote. Wtf. At first it only worked intermittently and then the remote stopped working all together. The button on the unit does not power it on anymore. If you live in the cities, don't buy a wen. Wens solution was to unplug it and only plug it in when I need to use it. So I'd have to climb a ladder into the rafters to plug it in everytime. No thanks. Shop around for better products. Only had it a year or so.

Great video. Another useful recommendation: create smaller groupings of items, which enable you to create useful sets of easily portable “toolboxes” that you can shuttle between the wall and bench for common tasks. For example a glue+tape+glue spreader+…. Or a flush trim hand router + associated bits. Or small screw sets plus …

I had a model older than this one that I love. My sister has difficulty with tools that are too heavy and she actually loved mine and found it easy to use ruclips.net/user/postUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG . This is a newer model but was even lighter which she really appreciates. She enjoys it and I no longer have to go to her house to trim as she can handle it fine. Haven't used it enough to comment on the battery life but lithium batteries last longer than the old style. Being cordless makes it easy to trim the far edges of the property. The entire yard can be trimmed with one charged battery.

do you have the brushed or brushless expand it head? and are u using the low or high speed setting to edge?

What type of wood

Been watching several different methods for building these accent walls, and this video was the most complete as far as I'm concerned. Beautiful end produce, which is the point.

Finally figured it out. I was looking how to affix the handle. It doesn't secure to the shaft tight enough. Yours is already affixed. I got the carbon fiber shaft. Different model...

Looks awesome. I’m curious, is there a benefit to using the plywood backer board vs attaching the cleats directly thru the drywall

Appears to shoot the grass and dirt right back into the freshly-cut channel. Hmmm... I have an older version of this edger and will probably just continue using it instead of upgrading.

3 minutes to just get the trimmer out of the box.

I want to make a show rack. I've watched several different videos. I have to say i like yours the best

I was specifically watching to see how to attach the black deflector. Thanks for NOT showing it!!

Wrong on adjustment. You put the handle down .

Nice job! Subbed.

Okay, this is not an edge grain cutting board. But hey, nice video

You blew all your time and money on tool organization. You could have bought 50 cases of Bud Light.

Nice work .

The zoomed out perspective where we can’t see the connection points and mumbled audio really makes this tutorial top notch, great help!

Your table looks nice. Could you talk instead of playing music.